Custom Reversible Jackets
CompareDescription
Aquaholic Gifts Singapore — Since 2003
Custom Reversible Jackets & Reversible Windbreaker Printing Singapore
A reversible windbreaker is not simply a jacket printed on two sides — it is a structurally different product with specific fabric construction, branding constraints, and design requirements. This page covers everything unique to the reversible format: what makes it different from a standard windbreaker, why embroidery is the correct branding method, and how to design effectively for both panels.
20–40 Working Days
Embroidery Recommended
Microfibre Bonded Fabric
What Makes a Reversible Jacket Structurally Different?
A custom reversible jacket is constructed from two complete layers of outer-quality fabric — both joined at the seams, zip, and collar, and both finished to be worn as the exterior. The wearer flips the jacket inside-out to reveal the second face. This is fundamentally different from a lined windbreaker, where the interior mesh is decorative and not intended to be worn outward.
The most common fabric specification for Singapore reversible windbreaker printing is microfibre bonded: a soft microfibre outer layer laminated to a smooth inner surface, giving the jacket structure and the warmth suited to air-conditioned environments while remaining lightweight outdoors. High-density polyester is not typically used for reversible construction because its interior finish is too raw to wear comfortably against clothing.
The dual-fabric build accounts for the $10–$20 per-piece premium over a standard single-layer windbreaker at equivalent specs.
Reversible vs Standard Windbreaker: Choosing the Right Format
If you are already browsing our custom jackets & windbreakers range, use this guide to decide whether the reversible format is right for your order — or whether a standard windbreaker serves your objectives better.
| Consideration | Reversible Windbreaker | Standard Windbreaker |
|---|---|---|
| Organisation has 2 distinct brand colours | Ideal fit | Less relevant |
| Staff move between formal & casual contexts | Best choice | Single context only |
| Large back print or full-panel graphic required | Not recommended | Better choice |
| Budget is a primary constraint | $10–$20 premium per piece | Lower cost baseline |
| Premium VIP gift or year-end programme | Higher perceived value | Functional, less premium feel |
| Logo is complex / gradient-heavy | Artwork adaptation may be needed | More method flexibility |
Branding Constraints: The Most Critical Planning Point
Important: Because both layers are worn against the body, embroidery is the primary recommended branding method for reversible windbreaker panels. DTF, heat-transfer, and silkscreen films bond to the fabric surface — when that side is worn as the interior, the film contacts clothing and skin, causing discomfort and accelerating delamination. Embroidery thread penetrates the fabric cleanly; the back of the design is flat and invisible when worn reversed.
Recommended
Embroidery
Thread penetrates both fabric layers from front to back. The reverse side is a clean, flat thread network — invisible when worn inward and completely comfortable against clothing. Works on both panels simultaneously.
Best for: Corporate wordmarks, clean logo shapes, chest and sleeve placements up to 10–12 cm wide.
Limited Use
Silkscreen Printing
Acceptable on a designated outer panel only. Must be confirmed with your supplier before artwork sign-off. Not suitable for the interior-facing panel.
Best for: Simple 1–2 colour logos on the fixed outer side where reversing is infrequent.
Not Recommended
DTF & Heat Transfer
Film adhesive bonds to the fabric surface. When the printed side is worn as the interior, the film contacts clothing — this is uncomfortable and causes edge peeling after repeated wear-and-reverse cycles.
Use instead: These methods are fully suitable for our standard (non-reversible) windbreakers.
How to Design Effectively for Both Panels
Because both sides can be seen, every design decision must work in both wearing orientations. Most orders fail at this stage — the primary panel is specified clearly, but the secondary panel is either underdefined or creates a visual conflict with the zip tape or collar detail.
The Branded Exterior
Carries your main corporate logo at chest-left (8–10 cm wide recommended). Optional secondary placement: right sleeve or back centre below collar. Keep the chest logo clean — embroidery at this scale retains detail and reads clearly from a normal conversation distance.
Provide: Pantone code + vector logo (AI or EPS).
The Interior Face
Three common approaches: (1) Clean — no branding (most popular; gives recipients a genuinely neutral jacket for personal use). (2) Tonal embroidery — same thread colour as the fabric, visible only as texture. (3) Subtle logo in secondary brand colour. Avoid high-contrast or large logos on this panel unless the wearer context requires it.
Provide: Pantone code for interior fabric.
The Fixed Element
The zip tape colour and collar are the same on both sides — they cannot be reversed. Choose a neutral zip tape (black, dark navy, or fabric-matching) that works with both colour faces. A bright accent zip that suits the exterior may clash badly with the interior colour.
Confirm zip tape colour relative to both panels.
Order Specifications
Min. Order Qty
100 pcs
Production Lead Time
20–40 working days
Branding Method
Embroidery (primary)
Recommended Fabric
Microfibre bonded
Sizes Available
XS – 3XL
Sizing Note
Runs ~1 size larger than standard; always request samples
How to Place Your Order
Send your brief
Exterior & interior Pantone codes (or fabric swatches), vector logo file (AI / EPS), zip tape colour preference, size breakdown (XS–3XL), quantity, and required delivery date. Submit via our contact page or WhatsApp +65 6589 8175.
Receive mockup & quotation
Digital embroidery mockup on both panels with itemised quote. Revisions included until artwork is approved.
Physical sample (strongly recommended)
For first-time reversible orders and any programme above 200 pcs, a pre-production sample is essential. Colour and fabric combinations in person differ from digital mockups. This is particularly important for the zip tape selection relative to both panel colours.
Confirm & production begins
Once sample is approved and deposit received, full production commences. Lead time is 20–40 working days from this point. Plan a minimum of 10 weeks ahead for year-end gifting periods.
Delivery to your location
Delivered to your office or event venue in Singapore. Bulk packing standard. Individual gift boxing available on request (add-on cost and lead time).
Frequently Asked Questions
Related Guides & Categories
Pillar Page
Custom Jackets & Windbreakers Singapore
Browse our full range of single-side windbreakers, hoodies, varsity and bomber jackets →
Deep-Dive Guide
Custom Reversible Windbreaker Singapore — Complete Guide
Fabric construction, pricing, ordering brief checklist →
Strategy
Brand Recall Through Wearable Merchandise like Custom Jackets
Why branded outerwear outperforms traditional advertising →
Related
Custom Hoodies for Onboarding, Team Building & D&D
Hoodie alternative for casual or budget-conscious programmes →
Schools & Camps
Custom Hoodies for Singapore Universities, Schools & Camps 2026
Student CCA and orientation jacket options →
Also in Jackets
Custom Varsity Jacket Singapore — Bomber & Letterman Jackets
Premium structured outerwear for cohort and milestone gifting →
Get a Quote — Reversible Windbreaker Printing Singapore
Ready to Order Your Custom Reversible Jackets?
Share your brief and we will respond with an embroidery mockup and quotation within 1–2 business days. MOQ 100 pcs · Lead time 20–40 working days.
Aquaholic Gifts Pte Ltd · Corporate Gifts Supplier Singapore · Since 2003
